Starting 05/23/22 we are planning to be open 12:00 – 15:00, M-F .
Until further notice the max. number of people per room allowed at any time are listed below:
MEL 2001 – Bike Lab (7), Project work (8), Torque testing (7)
MEL 2009 – Lab (12), Project work (16)
Wood Shop – (3)
$10/hour (round up to the next 15 min. interval)
1 min. to 15 min. is $2.50
16 min. to 30 min. is $5
31 min. to 45 min. is $7.50
46 min. to 60 min. is $10
$0.30 per pound of garnet (fine cutting sand)
We have received a donation of stepper motors. If you are working on a course/RSO/EOH project or similar and need free stepper motors please see me.
Below are the specifications:
NEMA 23 (bipolar)
2.8 A (max.)
holding torque 0.7 Nm
The Innovation Studio will relocate to a new area in MEB and opening times may be sporadic.
Please note that equipment is not always available due to maintenance and relocation activities.
The Innovation Studio is currently seeking student volunteers to help out with daily Studio activities during the 2017 fall semester. Volunteers would be asked to work a minimum of four hours a week, gaining hands-on experience. No experience is necessary. You will be trained in the use of desktop 3D printers, laser cutters, woodshop, and other Studio equipment.
Please see Ralf Moller or Sam Santos in MEL 2009 (or 2011) if you are interested or need more information.
Due safety reasons, no wood or paper materials will be allowed to be cut with Innovation Studio laser cutters.